MANATEE software offers several tools to quikly identify the **root cause of acoustic noise and vibrations** in terms of nature (forced or resonant mode) and physical origin (e.g. flux density harmonics involved in vibration, radial or tangential force). This article presents the post processing which can be used to identify the origin of electromagnetically-excited noise and vibration and take appropriate **noise control actions**.

### Identification of resonance

To identify if the noise (resp. vibration) is coming from a particular resonance with a structural mode, the best is to plot the **contribution of the structural modes to the overall noise level** (resp. vibration) level as a function of speed. This can be done with the post processings plot_VS_ASWL_modal_contribution for noise (or plot_Ar_modal_cont for vibration). If a resonance involves a lamination mode (2,0) it means that the harmonic magnetic force has a wavenumber r=2. This graph therefore gives an idea of both critical speeds and magnetic force wavenumbers involved in noise generation.

The difference between** forced and resonant regimes** can be done looking at static (infinite natural frequencies) versus dynamic radial vibration velocity. The corresponding post processings are plots_Vr_fft (dynamic) and plot_Vr_static_fft (static). Similarly the static radial displacement FFT2 plot_Ur_static_fft2 can be compared with the dynamic radial displacement FFT2 plot_Ur_fft2.

One can also check at a given speed the Fourier content of Maxwell stress radial and tangential harmonics using plot_MTr_fft2 and plot_MTt_fft2, or stator tooth forces harmonics using plot_Fr_fft2 and plot_Ft_fft2.

These post processing displays the lamination structural mode on the top of the Fourier transform of forces, so one can also check if the **resonance condition** is fulfilled (match between wavenumber r and mode circumferential order m + match between exciting force frequency f and mode natural frequency).

### Numerical Transfer Path Analysis - SBN Vs ABN

When Electromagnetic Vibration Synthesis or Electromagnetic Noise Synthesis algorithms are used, one can separate the effect of different force wavenumbers and direction of application on the overall NVH levels. The post processing can be done for all load cases using plot_VS_ASWL_LC_cont or for a specific excitation order using plot_VS_ASWL_LC_cont_order plot command. This way, one knows if the noise levels mainly comes from rotor excitation (structure borne noise) or stator excitation (airborne noise).

### Analysis of force frequency and wavenumber

To identify more precisely the electrical frequency and wavenumber of the Maxwell force harmonic responsible for high noise and vibration levels, one can use the at variable speed the** order tracking analysis** with plot_VS_ASWL_order_analysis.

For some topologies (e.g. SCIM) the analytical formula of the exciting force frequency and wavenumber corresponding to the numerical excitation are displayed. This expression can then be related to the **physical origin of the magnetic force**.

As an example, if the order tracking analysis shows that the vibration or noise line frequency is f=fs(Zr/p+2) the multiplication factor in front of Zr corresponds to the rank of the rotor slotting permeance harmonic. Similarly, a line labelled with r=2Zs-4p means that the wavenumber of the harmonic force is related to the second rank of stator slotting permeance. The rank of permeance Fourier expression is important when optimizing the slot opening or the skewing.

To directly discriminate different wavenumbers in a noise or vibration spectrogram it is advised to use **MANATEE key post processing of spatiograms** with the plot command plot_VS_ASWL_spatiogram.

Finally, all these interpretations can be compared to the theoretical analysis of magnetic resonances provided in the text output of the simulation, or using offline harmonic identification commands.

### Effect of the load

One important thing to understand is if the **noise is coming from load-related harmonics** or not (load noise Vs open circuit noise in PMSM). In particular, in PMSM the armature field is responsible for some specific magnetic forces. To discriminate the noise due to partial load operation from the noise due to open circuit operation one can simply cancel out the armature field by imposing null current or by **cancelling the calculation of the armature field** with

`is_mmfs=0`

### Identification of flux density harmonics involved in noise generation

Some useful scripts are also provided to automatically **find the permeance / magnetomotive force harmonics ** that can be the cause of a given force/vibration/noise harmonic in each topology.

As an example, to identify the stress waves present in Prius PMSM 48s8p e-motor in open circuit, the following command is used:

Further command lines of type "find_harmonic" are detailed in the dedicated article on how to identify main e-NVH magnetic force waves.

### Extensive harmonic analysis

Identifying the critical speed, frequency and wavenumbers of magnetic forces is not enough to carry noise mitigation action.
A key question is which specific **field harmonic (rotor Vs stator), permeance harmonic and magnetomotive force harmonic** is responsible for noise.

To carry this full analysis automatically, a special simulation mode called **automated harmonic analysis ** can be run.

This type of analysis can also be carried manually by switching off and on these harmonic sources and check the impact on NVH behaviour.

### Harmonic interferences (advanced)

The **constructive and destructive interferences** between radial flux or tangential flux harmonics can be studied more quantitatively on a given radial (resp. tangential) force harmonic with plot_Fr_vectors (resp. plot_Ft_vectors). This allows to identify the combination of flux density waves creating a given magnetic force harmonic.

To go further, one can identify the combination of permeance / magnetomotive force waves creating a given flux harmonic using plot_Br_vectors (resp. plot_Bt_vectors);

### Cancellation of some specific harmonics (advanced)

To go further, if a special combination of permeance / mmf harmonic and flux density harmonic has been identified as a key contributor of magnetic noise and vibration, one can check that it is the case by **cancelling a specific set of harmonics**. This analysis can be carried using the dedicated harmonic cancellation tool.

### Radial Vs tangential effects (advanced)

To identify whether noise / vibration is mainly due to radial forces or tangential forces, one can cancel tangential forces by using

`Input.Simu.is_forcetan=0`

This way the tangential FRF are cancelled and one can compare noise with and without tangential forces.

The respective contribution of radial & tangential field to the radial Maxwell stress can also be studied by using

`Input.Simu.is_approx_rad=0`

in this case the Maxwell radial force is calculated using both radial and tangential airgap flux density. With *Input.Simu.is_approx_rad=1* the radial Maxwell stress is directly proportional to the square of the radial flux density.